Verification

Verification







HINT: After carrying out the repair, check that the fault has been remedied.

- Ignition off
- Reconnect the connectors, reinstall components etc.
- Ignition on
- Read off the status from the stop lamp switch.

Check the function of the stop lamp switch by carefully pressing and releasing the brake pedal.

Check that the status changes between "OFF" when the brake pedal is unaffected and "ON" when the brake pedal is depressed.

If the status of the stop lamp switch changes as described above when the brake pedal is depressed, the fault has been remedied.

Is the function OK?

YES: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions
NO: Continue with Test (See "Fault-Tracing Information - Permanent Fault"). Fault-Tracing Information - Permanent Fault