Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-6410

Condition




Diagnostic trouble code (DTC) ECM-6410 is stored if the engine control module (ECM) registers a fault in the signal cable to the reset valve for the exhaust camshaft.
Diagnostic trouble code (DTC) ECM-6410 can be diagnosed when the ignition is on.

Substitute value
- Shutting off the variable camshaft.

Possible source

Signal too high
- Short-circuit to supply voltage in the signal cable
- Defective camshaft exhaust (Variable valve timing (VVT)) reset valve.

Signal too low
- Short-circuit to ground in the signal cable
- Short-circuit to ground in the power supply cable
- Contact resistance
- Defective camshaft exhaust (Variable valve timing (VVT)) reset valve.

Signal missing
- Open-circuit in the signal cable
- Open-circuit in the power supply cable
- Short-circuit to supply voltage in the signal cable
- Defective camshaft exhaust (Variable valve timing (VVT)) reset valve.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit
- The engine misfires.