Adjust

4.0 Adjust






The following is available from the adjust menu:

- In a city
- Stored locations
- Lat. & Lon.

When selecting "In a city" or "Stored locations", leave the diagnostic menu and go to the standard menus in the navigation system. See the user manual for further information about these options. It is not then possible to scroll back to the diagnostic menu. "Stored locations" can only be selected if destination has been stored previously.

4.3 Lat. & Lon.

Displays the latitude and longitude of the present location.






Press to activate the function. The latitude and longitude are adjusted automatically when a GPS signal is received. These settings can be modified manually. Use the right and left arrows on the navigator to move to the correct digits. Use the up and down arrows to select the location. Press to confirm the change and exit the diagnostic functions. Press to scroll back to the Adjust sub-menu.

Note: This setting is adjusted automatically when there is communication with at least 3 GPS satellites.