Procedures

Removing The Rear View Mirror And Holder







- Press the mirror backwards and out through the holder.

NOTE: Press the holder as close to the window as possible.

Installing holders

WARNING: Use protective goggles and protective gloves.

- In the event of splashes in the eyes: Rinse using running water for 15 minutes. Consult a doctor.
- May irritate sensitive skin. Rinse immediately using water.
- Contents: Acrylic acid and metacrylic acid.
- Remove the adhesive residue from the window and holder.
- Mark the position for the holder.
- Apply a thin layer of adhesive P/N 1161481.
- Install the net film.
- Allow the adhesive to dry for 15 minutes before installing the holder.
- Bond the mounting to the holder.
- Allow to cure for approximately 12 hours.

Installing The Mirror
Install the mirror in the holder. Press forward until the mirror secures.