Crankshaft Position Sensor: Service and Repair

Engine speed (RPM) sensor, replacing

Removing the engine speed (RPM) sensor

Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.





Remove:
- the hose clamp for the air cleaner (ACL)/fresh air intake
- the air cleaner (ACL) in the intake pipe
- lift out the air cleaner (ACL).




Remove the mounting nut for the sensor.
Pull up the sensor.

Installing the engine speed (RPM) sensor
Install the sensor. Use a new nut. Tighten to 10 Nm.

Install
- the air cleaner (ACL) housing and the hose clamp for the air cleaner (ACL)/fresh air intake
- the intake pipe.