Horn: Service and Repair

Horn, replacing

Removal

Preparatory work

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Remove the right-hand headlamp. Headlight/Bulb, Replacing

Removing the horn

Hint: Remove one of the horns from the bracket to facilitate removal and installation.

Slacken of the screw for the bracket.
Angle out the horn and the bracket.
Disconnect the connector.

Installation

Installing the horn
Connect the connector.
Horn and bracket.
The screw. Tighten

Finishing work
Install the right-hand headlamp. Headlight/Bulb, Replacing

Test the function.