Bevel Gear Seal Rings, Replacing

Bevel gear seal rings, replacing
Special tools: 999 5654, 999 7178, 999 7191

Note: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information is always correct.

Preparatory work
Method contents
This method consists of two different methods:
- Drive shaft seal ring, front right side, replacing
- Seal ring for crown wheel shaft of bevel gear, replacing

Removing the drive shaft
Remove the drive shaft according to: Axle Shaft Assembly; Service and Repair.

Drive shaft seal ring, front right side, replacing
Removing the seal ring





Detach the seal ring from the crown wheel shaft. Use a screwdriver/jimmy bar.

Installing the seal ring
Install the new drive shaft seal ring.
Lubricate the seal with wheel bearing grease. Use 999 5654. Tap the ring in to the stop.





Note: If the crown wheel shaft seal is be replaced as well, see Seal ring for crown wheel shaft of bevel gear, replacing.