Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-710A

Condition
The central electronic module (CEM) transmits the global time on the CAN network. If this is not transmitted to the engine control module (ECM), it is interpreted as a fault. The diagnostic trouble code (DTC) is stored in the engine control module (ECM).
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
None.

Possible source
- Open-circuit in the control area network (CAN) wiring
- Short-circuit between the control area network (CAN) wiring
- Internal fault in the engine control module (ECM)
- Internal fault in another control module in the same part of the control area network (CAN).

Fault symptom[s]
None.