Center Mounted Brake Lamp: Service and Repair
Lighting, Rear
High mounted stop lamp
NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.
Removal
Removing the high level stop lamp
NOTE: The brake light can only be replaced as a complete unit.
Remove:
- the panel from the tailgate.
- the 2 clips
- the connector.
Slide the lamp straight back. Remove the lamp.
Installation
Installing the high level stop lamp
Install:
- the lamp
- the 2 clips
- the connector.
- the panel in the tailgate.