Operation CHARM: Car repair manuals for everyone.

Programming the Driver Information Module (DIM)






Programming the driver information module (DIM)

Programming the driver information module (DIM)
The following data and customer settings can be programmed in the driver information module (DIM):
- Distance conditions for service.
- Time conditions for service.
- Engine time conditions for service.
- Unit for temperature.
- Trip computer unit.
- 12 or 24 hour clock display.
- Parking brake warning On/Off.

Note! The Driver information module (DIM) must be set to User Defined to program the distance conditions, time conditions, engine time conditions, temperature unit, driving computer unit and 12 or 24 hour clock display. This only needs to be done once and takes place with a software download. Click on the symbol for VCT2000 to read out which service interval that the driver information module (DIM) has.

For further information see: Description of the programmed values Description of the Programmed Values





Is the service interval User Defined?

Yes - Selecting the instrument type

No - Ordering software for User Defined

-------------------------------------------------

Selecting the instrument type
Select one of the following alternatives (for kilometers or miles).

Hint: If the speedometer goes from 0-260 the combined instrument panel is intended for kilometers, if it goes from 0-160 it is intended for miles.

1. Kilometer.
2. Miles.

Select required alternative.

1 - Programming distance conditions for service (km)

2 - Programming distance conditions for service (miles)

-------------------------------------------------

Programming distance conditions for service (km)




- Ignition on.
There are three service parameters that can be programmed. This parameter is used to indicate the number of kilometers the vehicle may be driven before the service reminder indicator (SRI) lights.
The following options are available:
- 5000 km
- 7500 km
- 10.000 km
- 12.000 km
- 15.000 km
- 20.000 km
- 30.000 km.
Read off the parameter that is programmed.
To change the service parameter, mark the desired value in the list and start programming.





Continue - Programming the time conditions for service

-------------------------------------------------

Programming distance conditions for service (miles)




- Ignition on.
There are three service parameters that can be programmed. This parameter is used to indicate the number of miles the vehicle may be driven before the service reminder indicator (SRI) lights up.
The following options are available:
- 2.500 miles
- 5.000 miles
- 6.000 miles
- 7.500 miles
- 10.000 miles
- 12.000 miles
- 18.000 miles.
Read off the parameter that is programmed.
To change the service parameter, mark the desired value in the list and start programming.





Continue - Programming the time conditions for service

-------------------------------------------------

Programming the time conditions for service




- Ignition on.
There are three service parameters that can be programmed. This parameter is used to set the number of months the vehicle may be driven before the service reminder indicator (SRI) lights.
The following options are available:
- 6 months
- 12 months
Read off the parameter that is programmed.
To change the service parameter, mark the desired value in the list and start programming.





Continue - Programming the engine time conditions for service

-------------------------------------------------

Programming the engine time conditions for service




- Ignition on.
There are three service parameters that can be programmed. This parameter is used to set the number of hours the engine may be running for before the service reminder indicator (SRI) lights.
The following options are available:
- 375 hours
- 500 hours
- 750 hours
- 1000 hours
- 1100 hours.
Read off the parameter that is programmed.
To change the service parameter, mark the desired value in the list and start programming.





Continue - Programming the unit for temperature

-------------------------------------------------

Programming the unit for temperature




- Ignition on.
The units of measurement for the temperature can be set.
Celsius or Fahrenheit can be selected.
Read off the parameter that is programmed.
To change the unit, mark the required unit in the list and start programming.





Continue - Programming the units for the trip computer

-------------------------------------------------

Programming the units for the trip computer




- Ignition on.
It is possible to set desired unit for the trip computer if this function is purchased.
The following units can be selected:
- Liter.
- GB Gallon
- US Gallon
- km/l
Read off the parameter that is programmed.
To change the unit, mark the required unit in the list and start programming.





Continue - Programming the clock mode

-------------------------------------------------

Programming the clock mode




- Ignition on.
The clock display can be set.
12 hour display or 24 hour display is available.
Read off the parameter that is programmed.
To change the value, mark the desired value in the list and start programming.





Continue - Programming the parking brake warning

-------------------------------------------------

Programming the parking brake warning




- Ignition on.
It is possible to activate or deactivate the parking brake warning.
Read off the parameter that is programmed.
To change the value, mark the desired value in the list and start programming.





Continue - DONE

-------------------------------------------------

Ordering software for User Defined
Order the software. See30682697

Continue - Selecting the instrument type

-------------------------------------------------