12 - Checking EVAP Canister Purge Valve

Checking EVAP Canister Purge Valve







HINT: Leakage through the EVAP canister purge valve can be checked by blocking the hose between the carbon filter container and the evaporative emission system (EVAP) valve and then running the quick test of the fuel tank system. If leakage was detected in a previous quick test of the fuel tank system but is not now detected when the hose between the EVAP canister and the purge valve is blocked, the leakage may be through the EVAP canister purge valve.

- Disconnect the hose between the evaporative emission system (EVAP) valve and the carbon filter container from the connection to the evaporative emission system (EVAP) valve. Block the hose while running the quick test of the fuel tank system.

Other Information:
- For the location of the components, see Location of components.

Select Continue to activate the evaporative emission system (EVAP) valve

Continue: Refer to 13. Checking EVAP Canister Purge Valve. 13 - Checking EVAP Canister Purge Valve