Downloading Software [4 of 4]
Downloading
The software is being downloaded.
Please wait!
Numeric Result 0 - OK
Numeric Result 4 -
Numeric Result -32000 - Communication fault
Numeric Result -33000 - Communication fault
Numeric Result -32008 - Communication fault
Numeric Result 25419 - Communication fault
Numeric Result 25456 - Communication fault
Numeric Result 28 - Communication fault
Numeric Result 25468 - Communication fault
Numeric Result 24577 - Communication fault
Numeric Result 25345 - Communication fault
Numeric Result -200000 - Download failed
Numeric Result -200001 - Download failed
Numeric Result -200002 - Download failed
Numeric Result -200003 - Download failed
Numeric Result -200004 - Download failed
Numeric Result -200005 - Download failed
Numeric Result -200007 - Communication fault
Numeric Result -210004 - Download failed
Numeric Result -230004 - Check sum error
Numeric Result 24576 - Download failed
Numeric Result 24832 - Download failed
Numeric Result 24578 - Download failed
Numeric Result 24833 - Download failed
Numeric Result 24834 - Download failed
Numeric Result 24835 - Download failed
Numeric Result 24836 - Download failed
Numeric Result 24838 - Download failed
Numeric Result 24848 - Download failed
Numeric Result 24849 - Download failed
Numeric Result 24850 - Download failed
Numeric Result 24880 - Download failed
Numeric Result 24881 - Download failed
Numeric Result 24890 - Download failed
Numeric Result 24891 - Download failed
Numeric Result 24896 - Download failed
Numeric Result 24898 - Download failed
Numeric Result 24902 - Download failed
Numeric Result 24910 - Download failed
Numeric Result 25856 - Download failed
Numeric Result 25857 - Download failed
Numeric Result 25858 - Download failed
Numeric Result 27152 - Download failed
Numeric Result 27153 - Download failed
Numeric Result 27154 - Download failed
Numeric Result 27155 - Download failed
Numeric Result 27156 - Download failed
Numeric Result 27157 - Download failed
Numeric Result 27158 - Download failed
Numeric Result 27159 - Download failed
Numeric Result 27160 - Download failed
Numeric Result 27161 - Download failed
Numeric Result 27162 - Download failed
Numeric Result 27163 - Download failed
Numeric Result 27164 - Download failed
Numeric Result 27165 - Download failed
Numeric Result 24892 - Download failed
Numeric Result 24908 - Download failed
------------------------
Resetting vehicle
The vehicle is being reset.
Please wait!
Numeric Result -33000 - Communication fault
Numeric Result 0 -
Numeric Result 0 -
------------------------
Checking control modules
OK - Downloading
Not OK - Resetting vehicle
------------------------
Download failed
A fault arose while downloading for one of the following reasons:
- Battery voltage too low
- The connection between the VIDA PC and VCT2000 has failed
- The connection between VCT2000 and the data link connector (DLC) has failed
- One of the control modules is not responding
- The software package obtained is damaged or incomplete.
Ensure that:
- Battery voltage exceeds 12 V
- VCT2000 is correctly connected to the VIDA PC
- VCT2000 is correctly connected to the data link connector (DLC) in the vehicle.
Try again or exit the download.
The software download can proceed without software being ordered. However the download must be repeated.
Do you want to try again?
Yes - Resetting vehicle
No - Resetting vehicle
------------------------
Communication fault
The communication between the VIDA PC and VCT2000 has failed for one of the following reasons:
- The ignition is OFF
- The VST/VCT2000 switch is not in the VCT2000 position
- VCT2000 is not connected to the data link connector (DLC)
- VCT2000 is not connected to the VIDA PC / switch
- Communication problems in the VIDA application and / or in the vehicle
- The battery voltage is too low.
Ensure that:
- The ignition is ON and the switch is in the VCT2000 position
- VCT2000 is correctly connected to the data link connector (DLC) in the vehicle and to the VIDA PC / switch
- There are no faults in VCT2000 or any associated components VCT2000 and any associated components are functioning
- Battery voltage exceeds 12 V.
If you decide not to make a new attempt, the software package must be loaded again.
Do you want to attempt to establish communication again?
Yes - Resetting vehicle
No - Resetting vehicle
------------------------
Communication fault
The communication between VCT2000 and the vehicle has failed for one of the following reasons:
- Battery voltage too low
- One of the control modules is not responding
- The ignition is off.
Ensure that:
- Battery voltage exceeds 12 V
- The ignition is on.
If the battery voltage is correct, check which control module is faulty.
If you decide not to make a new attempt, the software package must be loaded again.
Do you want to attempt to establish communication again?
Yes - Resetting vehicle
No - Resetting vehicle
------------------------
Check sum error
The software has not been downloaded correctly.
The software package must be reordered.
Select Continue to complete the software download.
Continue - Resetting vehicle
------------------------
Data error
Not OK - Resetting vehicle
------------------------
Resetting vehicle
The vehicle is being reset.
Please wait!
Numeric Result 0 - Incomplete software configuration
Numeric Result 0 - Incomplete software configuration
------------------------
Incomplete software configuration
You are in the process of exiting the software download.
This will result in an incomplete software configuration in the vehicle.
The software download can proceed without software being ordered. However the download must be repeated.
Continue - Not OK
------------------------
Download failed
There was a fault during the download because the PIN code required to open the central electronic module (CEM) is incorrect.
During the download, the central electronic module (CEM) is unlocked by a unique PIN code which is unique to that car. The download stops if the PIN code is incorrect
The PIN code may be incorrect for the following reasons:
- A central electronic module which has been used previously.
A central electronic module (CEM) can only be used in the vehicle for which it was programmed the first time.
Select "Continue" to exit the download and replace the central electronic module (CEM).
Continue - Resetting vehicle
------------------------
OK - Programming parameters
Not OK - DONE
-------------------------------------------------
Programming parameters
Reading vehicle data
Vehicle data is read in order to determine the engine variant.
Please wait!
Numeric Result 0 - Programming parameters
Numeric Result 1 - OK
------------------------
Programming parameters
Parameters are programmed in the additive dosing module (ADM).
Please wait!
Numeric Result 0 - OK
------------------------
OK - Create a confirmation file
-------------------------------------------------
Create a confirmation file
Information stored in the vehicle is read off and a confirmation file is created.
Please wait!
Numeric Result 0 - OK
Numeric Result -200000 - Download failed
Numeric Result -200001 - Download failed
Numeric Result -200002 - Download failed
Numeric Result -200003 - Download failed
Numeric Result -200004 - Download failed
Numeric Result -200007 - Download failed
Numeric Result -32000 -
Numeric Result -33000 -
Numeric Result -32008 -
Numeric Result 28 -
Numeric Result 25456 -
Numeric Result 25419 -
Numeric Result 25468 -
Numeric Result 24577 -
Numeric Result 25345 -
Numeric Result -210007 - Download failed
------------------------
YES - Create a confirmation file
NO - Resetting vehicle
------------------------
YES - Create a confirmation file
NO - Resetting vehicle
------------------------
Download failed
A fault arose while downloading for one of the following reasons:
- Battery voltage too low
- The connection between the VIDA PC and VCT2000 has failed
- The connection between VCT2000 and the data link connector (DLC) has failed
- One of the control modules is not responding
- The software package obtained is damaged or incomplete.
Ensure that:
- Battery voltage exceeds 12 V
- VCT2000 is correctly connected to the VIDA PC
- VCT2000 is correctly connected to the data link connector (DLC) in the vehicle.
Do you want to try again?
Yes - Create a confirmation file
No - Resetting vehicle
------------------------
Resetting vehicle
The vehicle is being reset.
Please wait!
Numeric Result 0 - Not OK
Numeric Result 0 - Not OK
Numeric Result 0 - Not OK
------------------------
OK - Downloading software
Not OK - DONE
-------------------------------------------------
Downloading software
Erasing diagnostic trouble codes (DTCs)
The diagnostic trouble codes (DTCs) are erased in all systems.
Please wait!
0 - Completion
------------------------
Completion
The software has been downloaded into the vehicle.
The confirmation file, with information about any modifications to the vehicle configuration and the P/Ns of the control modules, is sent to the central Volvo database.
Carry out a pre-delivery check before returning the car to the customer.
Note! Certain downloading sequences will cause the clock in the car to stop. Check and adjust as necessary.When programming or resetting the car, the ABS lamp will light. This is rectified by removing/inserting the key in the ignition switch.
Continue - DONE
-------------------------------------------------