Description of Parameters [2 of 4]

Hood switch, status
The parameter indicates the status of the hood.
The parameter can assume the values:
Closed = the hood is closed.
Open = the hood is open.

Left-hand front door, status
The parameter indicates the status of the left-hand front door.
The parameter can assume the values:
Closed = the left front door is closed.
Open = the left front door is open.

Right-hand front door, status
The parameter indicates the status of the right-hand front door.
The parameter can assume the values:
Closed = the right front door is closed.
Open = the right front door is open.

Left-hand rear door, status
The parameter indicates the status of the left-hand rear door.
The parameter can assume the values:
Closed = the left-hand rear door is closed.
Open = the left-hand rear door is open.

Right-hand rear door, status
The parameter indicates the status of the right-hand rear door.
The parameter can assume the values:
Closed = the right-hand rear door is closed.
Open = the right-hand rear door is open.

Door switch liftgate / luggage compartment lid, status
The parameter indicates the status of the liftgate / luggage compartment lid.
The parameter can assume the values:
Closed = the tailgate / trunk lid is closed.
Open = the tailgate / trunk lid is open.

Indicator LED alarm, status
The parameter indicates the status of the indicator LED alarm.
The parameter can assume the values:
Activated = indicator LED must light.
Not activated = indicator LED must not be lit.

Switch reduced alarm, status
The parameter indicates the status of the reduced alarm function.
The parameter can assume the values:
Activated = the function is activated.
Not activated = the function is not activated.

Unlocking liftgate / luggage compartment lid, status
The parameter indicates the status of the motor for unlocking the liftgate/luggage compartment lid.
The parameter can assume the values:
Activated = motor activated.
Not activated = motor not activated.

Note! The status of the motor will only display activated during the period the motor is activated, i.e. approximately 1 second after activation.

Switch liftgate / luggage compartment lid, status
The parameter indicates the status of the switch of the liftgate/luggage compartment lid.
The parameter can assume the values:
Activated = switch is activated.
Not activated = switch is not activated.

Unlocking fuel filler door, status
The parameter indicates the status of the switch for opening the fuel filler door.
The parameter can assume the values:
Activated = switch is activated.
Not activated = switch is not activated.

Power supply to mass movement sensor (MMS) or movement sensor (IMS) (IMS replaces MMS for S40, C30, and V50 from and incl. model year 2012), status
The parameter indicates status of voltage feed to mass movement sensors (MMS) or movement sensor (IMS).
The parameter can assume the values:
Activated = power supply activated.
Not activated = power supply not activated.

Lighting

Stoplamp, left, value
Measurement range 0 to 100 % of supply voltage.
The normal value when the supply voltage is 13.5 V is approximately 98 %.
When the supply voltage exceeds 13 V, the voltage level is regulated using pulse width modulation. The value indicates what proportion of the voltage level is being used.

Stoplamp, right, value
Measurement range 0 to 100 % of supply voltage.
The normal value when the supply voltage is 13.5 V is approximately 98 %.
When the supply voltage exceeds 13 V, the voltage level is regulated using pulse width modulation. The value indicates what proportion of the voltage level is being used.

Stop (brake) light switch, status
Displays the status of the stoplamp switch.
Activated = stop lamp switch is activated.
Not activated = stop lamp switch is not activated.

Low beam, left, value
Measurement range 0 to 100 % of supply voltage.
The normal value when the supply voltage is 13.5 V is approximately 98 %.
When the supply voltage exceeds 13 V, the voltage level is regulated using pulse width modulation. The value indicates what proportion of the voltage level is being used.

Low beam, right, value
Measurement range 0 to 100 % of supply voltage.
The normal value when the supply voltage is 13.5 V is approximately 98 %.
When the supply voltage exceeds 13 V, the voltage level is regulated using pulse width modulation. The value indicates what proportion of the voltage level is being used.

Parking lamps, group 1, value
Measurement range 0 to 100 % of supply voltage.
The normal value when the supply voltage is 13.5 V is approximately 98 %.
When the supply voltage exceeds 13 V, the voltage level is regulated using pulse width modulation. The value indicates what proportion of the voltage level is being used.

Parking lamps, group 2, value
Measurement range 0 to 100 % of supply voltage.
The normal value when the supply voltage is 13.5 V is approximately 98 %.
When the supply voltage exceeds 13 V, the voltage level is regulated using pulse width modulation. The value indicates what proportion of the voltage level is being used.

Fog lamp, rear, value
Measurement range 0 to 100 % of supply voltage.
The normal value when the supply voltage is 13.5 V is approximately 98 %.
When the supply voltage exceeds 13 V, the voltage level is regulated using pulse width modulation. The value indicates what proportion of the voltage level is being used.

Back-up (reversing) lamp, status
Displays the status of the reversing lamp.
Activated = back-up (reversing) lamp comes on.
Not activated = back-up (reversing) lamp does not come on.

Hazard warning signal flashers, status
Indicates the status of the hazard warning lamp switch.
Activated = the button for hazard warning lamps is depressed.
Not activated = the button for hazard warning lamps is not depressed.

Interior lighting, value
Measurement range 0 to 100 % of supply voltage.
The normal value when the supply voltage is 13.5 V is approximately 98 %.
When the supply voltage exceeds 13 V, the voltage level is regulated using pulse width modulation. The value indicates what proportion of the voltage level is being used.

Lamp, seat belt reminder, status
Displays the status of the lamp, seat belt reminder.
Activated = seat belt reminder lamp lit.
Not activated = seat belt reminder lamp lit.

Lighting rotary switch, status
Displays the status of the lighting rotary switch.
Activated = lighting switch activated.
Not activated = lighting switch not activated.

Relay

Relay for the horn, status
Indicates the status of the relay for the horn.
Activated = the relay for the horn is activated.
Not activated = the relay for the horn is not activated.

Relay, interior lighting, status
Displays the status of the relay, interior lighting. This relay supplies voltage to:
Courtesy lighting.
Roof lighting.
Lighting in sun visor.
Lighting in glove compartment.
Activated = relay, interior lighting is activated.
Not activated = relay, interior lighting is not activated.

Relay extended X-supply, status
Displays the status of extended X-supply, status. Extended X-supply, supplies voltage to:
Cigarette lighter socket in passenger compartment.
Seat heating.
Parts of the SRS system.
Parts of the climate control system.
Speed control.
Activated = the extended X-supply is activated.
Not activated = the extended X-supply is not activated.

Relay infotainment, status
Displays the status of relay infotainment.
Activated = relay, infotainment is activated.
Not activated = relay, infotainment is not activated.