Faulty Signal

Faulty signal

Information
No fault-tracing has been developed for this diagnostic trouble code (DTC). The diagnostic trouble code (DTC) for this fault is stored first in the central electronic module (CEM), then in the engine control module (ECM). This diagnostic trouble code (DTC) can not be erased before the diagnostic trouble codes (DTC) in the central electronic module (CEM) has been remedied and erased.
First read off the diagnostic trouble codes (DTCs) in the central electronic module (CEM). Fault-trace and remedy as necessary. This diagnostic trouble code (DTC) can then be erased. For further information about this diagnostic trouble code (DTC), select Information, then DTC information.

Select "Continue" to exit.

Continue - DONE

-------------------------------------------------