Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-4000

Condition




The diagnostic trouble code (DTC) is stored if the control module, when driving, registers a short-circuit to ground or supply voltage in the EVAP valve signal cable or an open-circuit.
The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- Fuel trim disabled.

Possible source

Signal too high
- Short-circuit to supply voltage in the signal cable.

Signal too low
- Open-circuit in the signal cable
- Short-circuit to ground in the signal cable
- Damaged EVAP valve.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit
- Fuel smell.