Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-4310

Condition




The engine control module (ECM) checks the control signal to the leak diagnostic pump.
The diagnostic trouble code (DTC) is stored if the engine control module (ECM) registers a fault in the control signal to leak diagnostic pump.
The diagnostic trouble code (DTC) can be diagnosed when the leak diagnostic system is run.

Substitute value
- Leak diagnostics interrupted.

Possible source

Signal too high
- Short-circuit to supply voltage in the signal cable
- Damaged leak diagnostic pump.

Signal too low
- Short-circuit to ground in the signal cable
- Open-circuit in the signal cable
- Damaged leak diagnostic pump.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit.