Fault-Tracing Information

Fault-tracing information

Fault-tracing information
The engine control module (ECM) receives a signal on gear selector position from the transmission control module (TCM) via the CAN network. The diagnostic trouble code is generated when the signal has not been updated correctly.
This could be due to a fault in the transmission control module (TCM) or intermittent faults in the CAN network.
Check and remedy any diagnostic trouble codes in the transmission control module (TCM).
Check the diagnostic trouble codes in the central electronic module (CEM) for CAN network faults.

Select "Continue" to exit.

Continue - INFO GIVEN

-------------------------------------------------