Center Mounted Brake Lamp: Service and Repair

Lighting, Rear

High mounted stop lamp

NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the high level stop lamp

NOTE: The brake light can only be replaced as a complete unit.

Remove:





- the panel from the tailgate.
- the 2 clips
- the connector.

Slide the lamp straight back. Remove the lamp.

Installation

Installing the high level stop lamp

Install:
- the lamp
- the 2 clips
- the connector.
- the panel in the tailgate.