Combined Instrument Panel, R-Design

Combined instrument panel, R-design
















INTRODUCTION
- NOTE! Read through the whole installation instruction before starting the work.
- The illustrations display the procedure in order of operation. The order of operation is repeated in the text section.






Combined instrument panel, R-design




Before replacing Driver information module, programmed data shall be read out from the Driver information module. This is done in VIDA car communication. After replacing, the data in question shall be programmed in the new Driver information module.





Note! Wait at least three minutes before unplugging the connectors or removing other electrical equipment.
































- Download new software for Driver information module acc. to the service information in VIDA. After downloading, data read-out shall be programmed, the clock shall also be set.