Cylinder Head Assembly: Specifications
Cylinder Head WarpageCylinder Head Bolts
Step 1 20 Nm
Step 2 60 Nm
Step 3 angle tightening 130°
Tighten the screws in sequence from the center and outwards.
Use new screws.
Intake Manifold
Lower section, against cylinder head 19 Nm
Upper section 10 Nm
Exhaust Manifold 24 Nm
Camshaft bearing housing / valve cover 14 Nm
Tighten the camshaft cover screws alternately, keeping it parallel to the cylinder head using the press tools.
Install all the screws. Tighten the screws from the middle and outwards.
Timing belt gear
Camshafts without variable valve timing 20 Nm
Camshafts with variable valve timing 10 Nm
VVT-module
Center screw 120 Nm
Center plug 35 Nm