Signal Too High

Signal too high

Replacing a component




- Ignition off
- Try by replacing the comfort relay (2/193) in Central electronic module (CEM). For more information, see wiring diagram and signal description.

Other information
- Connecting the breakout box Connecting The Breakout Box, Central Electronic Module (CEM)
- Signal specification Signal Description, Central Electronic Module (CEM)
- Location of components Component Location, Central Electronic Module (CEM)
- Control module relay box passenger compartment Service and Repair
- Checking wiring and terminals Checking Wiring and Terminals


Continue - Verification

-------------------------------------------------

Info




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-Tracing

No - Attempt New Test

------------------------

Attempt New Test - Replacing a component

-------------------------------------------------

Verification





Hint: After carrying out the repair check that the fault has been remedied.

- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
- Check that the relay works by pressing on the VCT2000 symbol.





Is the function OK?

Yes - Fault Found

No - Info

-------------------------------------------------