Headlamp Masking

Headlamp masking

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing headlamp
Remove the headlamp. See: Headlamp bulb Headlamp Bulb.

Adaptation

Adapting the beam




To avoid dazzling oncoming traffic due to an incorrect beam, the headlamp beam can be adjusted. A correct beam also distributes the light more effectively out to the side of the road.
The headlamp control must be in position (A) in left-hand traffic or in position (B) in right-hand traffic. See the illustrations.

Halogen lamp





Bi-Xenon lamp





Warning! Always disconnect the headlamp electrical connector and remove the headlamp from the vehicle before carrying out work on Bi-Xenon headlamps. There is high voltage and a risk of explosion.

Installation

Installing the headlamp
Install the headlamp. See: Headlamp bulb Headlamp Bulb.