Instrument Cluster / Carrier: Service and Repair

Combined instrument panel, R-design




















INTRODUCTION
- NOTE! Read through the whole installation instruction before starting the work.
- The front page gives the date of this edition and the edition it replaces
- The second page shows the tools needed for the installation and the contents of the installation kit
- The illustrations display the procedure in order of operation. The order of operation is repeated in the text section
- Cut out the text page in order to follow the illustrations and text at the same time.






Combined instrument panel, R-design





- Before replacing the Driver information module, programmed data must be read out from the Driver information module. This is done in VIDA vehicle communication. After replacement, the data in question must be programmed in the new Driver information module.






Note! Wait at least three minutes before unplugging the connectors or removing other electrical equipment.










































- Download new software for the Driver information module. After downloading, data read-out must be programmed. The clock must also be set.