General Fault

General fault

Replacing the component
If the fault is intermittent, it has been registered previously but is no longer present. Intermittent faults can occur for a number of different reasons. The fault is evaluated depending on how it occurs.
If the fault is permanent, replace the control module.
Initialize the window position after replacing the control module. This is done via VIDA vehicle communication.
Remedy as necessary.

Other information:





Continue - Verification

-------------------------------------------------

Verification




Verification power window mechanism

Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Check that the power window mechanisms can be operated.

Does the control for the power window mechanism operate?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFIED - FAULT FOUND

VERIFICATION FAILED - Fault-tracing information

-------------------------------------------------

Fault-tracing information

FAULT-TRACING FAILED - FAULT-TRACING FAILED

Attempt New Test - Replacing the component

-------------------------------------------------