Signal Too Low

Signal too low

Checking the wiring
If the fault is intermittent, it has been registered previously but is no longer present. Intermittent faults can occur for a number of different reasons. The fault is evaluated depending on how it occurs.
Check the signal cable from the control module in the rear door terminal #A1 (#1) to the lock motor. Check for a short-circuit to ground.
If no fault was found, replace the control module in the rear door.
Remedy as necessary.

Other information
- Signal specification Signal Description, Driver's Door Module / Passenger Door Module (DDM/PDM)
- Connecting the breakout box, driver door module / passenger door module (DDM/PDM) Connecting The Breakout Box, Driver Door Module / Passenger Door Module (DDM/PDM)

Continue - Verification

-------------------------------------------------

Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Restore components and connectors.
- Ignition on.
Check that the child-locks function.

Is the function OK?

Yes - FAULT FOUND

No - Information

-------------------------------------------------

Information

FAULT-TRACING FAILED - FAULT-TRACING FAILED

Attempt New Test - Checking the wiring

-------------------------------------------------