Signal Missing
Signal missing
Checking the power supply and ground terminal
- Ignition off.
Check the cable between central electronic module (CEM) terminal #A41 (#41) and remote control receiver (RRX) terminal #A1. Check for an open-circuit.
Check the signal cable between central electronic module (CEM) terminals #A35 (#35) and remote control receiver (RRX) terminal #A5. Check for an open-circuit. Check for a short-circuit to ground. Check for a short-circuit to supply voltage
Check the cable between remote control receiver (RRX) terminal #A3 and ground. Check for an open-circuit. Also check the ground terminal for oxidation.
Remedy the cables as necessary.
Other information
- Connecting the breakout box Connecting The Breakout Box, Central Electronic Module (CEM)
- Locking system receiver Locking System Receiver
- Checking wiring and terminals Checking Wiring And Terminals
Was a fault detected?
Yes - Verification
No - Checking communication
-------------------------------------------------
Checking communication
- Ignition off.
Check if the communication with remote receiver (RRX) works by locking and unlocking the car with the remote control's buttons.
Is the function OK?
Yes - Verification
No - Replacing the control module
-------------------------------------------------
Replacing the control module
- Ignition off.
If no fault is discovered on the cables for the remote control receiver (RRX), the unit will probably need to be replaced.
Other information
- Locking system receiver Locking System Receiver
Select Continue.
Continue - Verification
-------------------------------------------------
Verification
Verification
Hint: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the connectors, components etc.
Check if the communication with remote receiver (RRX) works by locking and unlocking the car with the remote control's buttons.
Is the function OK?
Yes - VERIFIED
No - VERIFICATION FAILED
------------------------
VERIFIED - FAULT FOUND
VERIFICATION FAILED - Fault-tracing information
-------------------------------------------------
Fault-tracing information
FAULT-TRACING FAILED - FAULT-TRACING FAILED
Attempt New Test - Checking the power supply and ground terminal
-------------------------------------------------