Procedures

Combined instrument panel, R-design























INTRODUCTION
- NOTE! Read through the whole installation instruction before starting the work.
- The front page gives the date of this edition and the edition it replaces
- The second page shows the tools needed for the installation and the contents of the installation kit
- The illustrations display the procedure in order of operation. The order of operation is repeated in the text section
- Cut out the text page in order to follow the illustrations and text at the same time.






Combined instrument panel, R-design





Before replacing Driver information module, programmed data shall be read out from the Driver information module. This is done in VIDA car communication. After replacing, the data in question shall be programmed in the new Driver information module.






Note! Wait at least three minutes before unplugging the connectors or removing other electrical equipment.










































- Download new software for Driver information module. After downloading, data read-out shall be programmed, the clock shall also be set.