Part 1

Navigation system, RTI

Equipment

Component overview

Operation number: 3970239700

Information

- Read through all of the instructions before starting installation.
- Notifications and warning texts are for your safety and to minimize the risk of something breaking during installation.
- Ensure that all tools stated in the instructions are available before starting installation.
- Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
- In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Conditions

Set the ignition key to position I.
Reinstall the battery's negative cable.

Color symbols

Note! This colour chart displays (in colour print and electronic version) the importance of the different colors used in the images of the method steps.

1. Used for focused component, the component with which you will do something.
2. Used as extra colors when you need to show or differentiate additional parts.
3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.
4. Used when the component is not fully removed from the vehicle but only hung to the side.
5. Used for standard tools and special tools.
6. Used as background color for vehicle components.

Removal

Release the lock.

Remove the panel.

Release the lock.

Repeat the steps when removing on opposite side.

Turn the steering wheel into neutral position.

Release the connector catches.
Disconnect the connectors.

Warning! Place the airbag module with the front side facing up in a safe storage area during work.

Note! This step requires considerable force.

Detach the panel.

Note! This step requires considerable force.

Remove the panel.

Disconnect any connector(s).

Accessory installation

Install component that comes with the accessory kit.
Connect the connector.

Install the panel.
Attach the wiring, using clips.

Installation

Install the panel.

Connect the connectors.

Ensure that all clips engage.

Install the panel.

Install the panel.

Removal

Remove the panel.

Disconnect the connector.

Vehicles with 5 inch ICM-display

Depress the locking device.

Accessory installation

Removal

All vehicles

Release the lock.

Remove the screws.

Remove the screws.

Cars with automatic transmissions

Release the shift-lock function.

Cars with manual transmissions

Release the lock ring which is located inside the gear lever boot.
Pull the locking sleeve and gear lever boot down. Take care so that the boot does not come loose from the lock ring.