Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code information BCM-C002001

Condition




Diagnostic trouble code BCM-C002001 is generated if the brake control module registers that the pump motor does not start or if there is no pump motor signal.
The diagnostic trouble code can be diagnosed when the ignition is on.

Substitute value
- ABS is blocked.
- TC is blocked.
- SC is blocked.
- AYC is blocked.
- BA is blocked.

Hint: For information on brake system abbreviations: Brake system, abbreviations, B6324S5 Testing and Inspection

Possible source
- Contact resistance in the terminals
- Defective pump motor fuse.
- Open circuit on voltage feed to pump motor.
- Open circuit on pump motor ground cable.
- Defective pump motor.
- Defective brake control module (BCM).

Fault symptom[s]
- General warning light on.
- ABS warning light on.
- ABS is not operational.
- Anti-spin is not operational.
- The stability function is not operational.
- The anti-skid function is not operational.