Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code information BCM-C111495

Condition




The AYC sensor comes in two variants: one for a two-wheel drive vehicle and one for a four-wheel drive vehicle. Diagnostic trouble code BCM-C111495 is generated if the brake control module (BCM) registers that the installed AYC sensor is not appropriate for the vehicle.

Substitute value
- TC is blocked.
- SC is blocked.
- AYC is blocked.

Hint: For information on abbreviations: Brake system, abbreviations, B6324S5 Testing and Inspection

Possible source
- Incorrect AYC sensor installed.

Note! This diagnostic trouble code (DTC) is not due to an internal hardware fault in the Brake control module (BCM) and must not be remedied by replacing the control module.

Fault symptom[s]
- General warning light on.
- Anti-spin is not operational.
- The stability function is not operational.
- The anti-skid function is not operational.