Fault-Tracing Information

Fault-tracing

Checking the start inhibitor status




- Ignition on.
- Depress the brake pedal.
- Read off the status of the start inhibitor.
Move the gear selector between the positions P, R, N and D.
In positions P and N, the status must be "Start permitted"; in other positions the status must be "Start not permitted".
The fault is permanent if the function is faulty.
If the function is correct, this is an indication that the fault was present previously but is not active at the moment, i.e. an intermittent fault.









Continue - Checking the wiring and sensors

-------------------------------------------------

Checking the wiring and sensors




- Ignition off.
Check the cable for a short-circuit to supply voltage.
Take readings between:
- Transmission control module (TCM) terminal #A5 (#A35) and engine control module (ECM) terminal #B15.
Remedy as necessary.

Other information
- Connecting the breakout box, B6324S5, TF-80SC, B6324S5, TF-80SC AWD Connecting The Breakout Box, Transmission Control Module (TCM)
- Signal specification, B6324S5, TF-80SC, B6324S5, TF-80SC AWD Signal Specification, Transmission Control Module (TCM)
- To access connector A:
- Checking wiring and terminals Checking Wiring And Terminals





Continue - Verification

-------------------------------------------------

Verification





Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
- Read off the status of the start inhibitor.
Move the gear selector between the positions P, R, N and D.
In positions P and N, the status must be "Start permitted"; in other positions the status must be "Start not permitted".





Is the function OK?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFICATION FAILED - Fault-tracing information

VERIFIED - FAULT FOUND

-------------------------------------------------

Fault-tracing information

Attempt New Test - Checking the start inhibitor status

-------------------------------------------------