B1668

DTC Troubleshooting: B1668

DTC B1668: Rear Shelf LF Antenna Circuit Open

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Select the MODE MENU from the HDS, then enter the SELF CHECK.

4. Check for DTCs with the HDS.

Is DTC B1668 indicated?
YES - Go to step 5.

NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections.


5. Turn the ignition switch to LOCK (0).

6. Disconnect keyless access control unit connector B (24P).

7. Disconnect the rear shelf LF antenna 2P connector.

8. Connect rear shelf LF antenna 2P connector terminals No. 1 and No. 2 to body ground with jumper wires.






9. Check for continuity between body ground and keyless access control unit connector B (24P) terminals No. 4 and No. 5 individually.

Is there continuity?
YES - Go to step 10.

NO - Repair open in the wire.






10. Reconnect keyless access control unit connector B (24P).

11. Connect the voltmeter between rear shelf LF antenna 2P connector terminals No. 1 and No. 2.

12. Turn the ignition switch to ON (II).






13. Select the FUNCTION TEST from the HDS, and do the TRUNK ROOM ANTENNA L DC OUTPUT.

Is there voltage?
YES - Replace the rear shelf LF antenna.

NO - Replace the keyless access control unit.