Hood Opener Cable Replacement

Hood Opener Cable Replacement

NOTE:

- Put on gloves to protect your hands.

- Take care not to scratch the body and related parts.

1. Remove these items:
- Upper grille cover Upper Grille Cover Replacement

- Headlight, left side Headlight Replacement

- Radiator tank, as needed

- Front inner fender, left side as necessary Front Inner Fender Replacement

- Kick panel, left side Interior Trim Removal/Installation - Front Door Sill Area

2. Disconnect the hood opener cable (A) from the hood latch (B). Service and Repair

3. Using a clip remover, detach the clips, and remove the grommet (C) from the body, then remove the hood opener cable from the vehicle. Take care not to kink the cable.

4. Install the cable in the reverse order of removal.
NOTE: If the clips are damaged or stress-whitened, replace them with new ones.