Rear Fender Liner: Service and Repair

Rear Inner Fender Replacement

Special Tools Required

- Push pin puller 07AAC-SJAA100
NOTE: Take care not to scratch the body.

1. Remove the rear suspension damper unit. Rear Suspension

2. Remove the rear inner fender (A).
-1 Remove the screws (B) and the clip (C) from the rear bumper (D) and from the rear inner fender.
-2 Remove the clips (E, F).
-3 On the front of the rear wheel arch, remove the clips (G) securing the side sill (H) and rear inner fender.
-4 Pull out the rear inner fender.
-4 NOTE: Left side shown, right side is similar.

3. Install the inner fender in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.