Paddle Shifter + (Upshift Switch) Replacement

Paddle Shifter + (Upshift Switch) Replacement

SRS components are located in this area. Review the SRS component locations Locations and the precautions and procedures Service and Repair in the SRS before doing repair or service.

1. Remove the steering wheel. Steering Wheel Removal

2. Remove the steering wheel rear cover (A).

3. Remove the paddle shifter + (upshift switch) connector from its holder, and disconnect the connector.

4. Remove the screw (B) securing the paddle shifter + (C), then remove and replace the paddle shifter +.

5. Install the new paddle shifter + with the screw, connect the connector, and install the connector in the holder.

6. Install the steering wheel rear cover.

7. Install the steering wheel. Steering Wheel Installation