Navigation System: Service and Repair

Navigation Unit DVD-ROM/CD-ROM Replacement

NOTE:

- Check any official Honda service website for more service information about the navigation system and software updates.

- Do not replace the navigation DVD to give a client a preview of an updated navigation DVD.

1. Turn the ignition switch to ON (II).

2. Push the open button (A) of the navigation unit located on the right side of the trunk.

3. Press the EJECT button (B).

4. Remove the navigation DVD/CD-ROM.

5. Insert the new navigation DVD/CD-ROM with the label facing up.

6. Close the front cover. Do not turn the ignition switch to LOCK (0); watch the navigation screen until the data is downloaded to the navigation unit.

7. Do the Map Matching.
NOTE: After servicing, the front cover and PC card slot door must be closed. If you start up the navigation system with the front cover or PC card slot door open, the display will indicate an error message.