Center Console Removal/Installation

Center Console Removal/Installation

NOTE:

- Put on gloves to protect your hands.

- Take care not to scratch the front seat, the dashboard, or the related parts.

1. Remove these items:
- Center console rear trim Center Console Rear Trim Removal/Installation

- Center trim Dashboard Center Trim Removal/Installation

2. Disconnect the rear accessory power socket connector (A), the auxiliary jack assembly connector (B), and if equipped, the USB jack connector (C).






3. Remove the screws (A) and the bolts (B) securing the center console (C).






4. Remove the center console (A).
-1 Detach the clips (B, C, D) by pulling the front edges of the console out from both sides.
Pull up the console to release the hooks (E).

5. Install the console in the reverse order of removal, and note these items:
- Make sure each connector is plugged in properly.

- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips and the hooks into place securely.

- Make sure the wire harnesses are not pinched.