Sunroof / Moonroof: Adjustments

Moonroof Glass Position Adjustment

The roof panel (A) should be even with the glass weatherstrip (B), to within 0+1/-1 mm (0+0.04/-0.04 in) all the way around, and the weatherstrip should evenly touch the roof panel at the front and rear. If not, make the following adjustment:






1. Remove the bracket cover. Service and Repair

2. Adjust the glass (A).
-1 Slightly loosen the TORX bolts with a TORX T25 bit.
Move the glass up or down and forward or rearward.
-3 Tighten all bolts securely.

3. If necessary, repeat on the opposite side.

4. Reset the moonroof control unit. Programming and Relearning