Side Defogger Vent Trim Removal/Installation

Side Defogger Vent Trim Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program

NOTE:
- Take care not to scratch the dashboard or the related parts.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

- The left side defogger vent trim is shown; the right side defogger vent trim is similar.

1. Insert the appropriate trim tool into a gap between the side defogger vent trim (A) and the dashboard, and push in the hook (B).

2. Pry up on the vent trim to release the hook (C), then remove the vent trim.

3. Install the tab area of the trim first, then push down on the trim until the hook securely engages the dashboard.