Passenger's Dashboard Trim Removal/Installation

Passenger's Dashboard Trim Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program

NOTE:
- Take care not to scratch the dashboard or the related parts.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the passenger's dashboard trim (A).
-1 Open the glove box.
Pull out on the bottom edge of the trim by hand.
-3 Detach the clips along the trim.

2. Install the trim in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.