Rear Seat Belt Replacement

Rear Seat Belt Replacement

NOTE: Check the rear seat belts for damage, Testing and Inspection and replace them if necessary.

Rear Seat Belt

1. Remove the rear seat cushion. Rear Seat Removal/Installation

2. Remove the lower anchor bolt (A).

3. Remove the rear shelf. Service and Repair






4. Remove the retractor mounting bolt (A) and the retractor bolt (B), then remove the rear seat belt (C) and the retractor (D).

5. Install the seat belt and the retractor in the reverse order of removal, and note these items:
- Apply medium strength liquid thread lock to the anchor bolts before reinstallation.

- Check that the retractor locking mechanism functions. Testing and Inspection

- Before installing the anchor bolt, make sure there are no twists or kinks in the rear seat belt.





Center Seat Belt and Seat Belt Buckles

1. Remove the rear seat cushion. Rear Seat Removal/Installation

2. Remove the center anchor bolts (A), then remove the right seat belt buckle (B), the center seat belt buckle (C), and the left seat belt buckle (D).






3. Fold down the rear seat-back.

4. Pull out the center seat belt through the slit in the seat belt guide.

5. Remove the rear shelf Service and Repair

6. Remove the retractor mounting bolt (A) and the retractor bolt (B), then remove the center seat belt (C) and the retractor (D).






7. Remove the rear center seat belt protector (E).

8. Install the seat belt and the buckles in the reverse order of removal, and note these items:
- Apply medium strength liquid thread lock to the center anchor bolts before reinstallation.

- Tighten the bolts to the specified torque.

- Check that the retractor locking mechanism functions. Testing and Inspection

- Assemble the washer on the center anchor bolt as shown.

- Before installing the center anchor bolt, make sure there are no twists or kinks in the center seat belt.

Center anchor bolt installation