Shift Lever Boot And A/T Gear Position Indicator Panel Base Replacement (A/T)

Shift Lever Boot and A/T Gear Position Indicator Panel Base Replacement

1. Remove the shift lever assembly. A/T Shift Lever Removal (A/T)

2. Remove the shift lever knob. A/T Shift Lever Knob Replacement (A/T)

3. Remove the A/T gear position indicator panel light socket (A) from the A/T gear position indicator panel base (B).

4. Remove the A/T gear position indicator panel base from the shift lever bracket (C).






5. Remove the A/T gear position indicator panel (A), from the A/T gear position indicator panel base (B).






6. Release the lock tabs (A) on the shift lever boot using a screwdriver.






7. Replace the shift lever boot (A) or the A/T gear position indicator panel base (B).

8. Install the shift lever boot on the A/T gear position indicator panel base.

9. Install the A/T gear position indicator panel.






10. Install the A/T gear position indicator panel base (A) on the shift lever bracket (B).
NOTE: Take care not to pinch the harness.

11. Install the A/T gear position indicator panel light socket (C) in the A/T gear position indicator panel base.

12. Route the A/T gear position indicator panel light harness as shown. Take the slack out of the harness, and secure the harness at the guide.

13. Install the shift lever knob. A/T Shift Lever Knob Replacement (A/T)

14. Install the shift lever assembly. A/T Shift Lever Installation (A/T)