Manufacturer Code Charts: 113

Adaptive Cruise Control (ACC) DTC Troubleshooting: 113

DTC 113: Lost Communication with the Gauge Control Module

1. Check the gauge control module with the gauge control module self-diagnostic function.

Is the gauge control module OK?
YES - Go to step 2.

NO - Replace the gauge control module, and recheck.


2. Clear the DTCs with the HDS.

3. Turn the ignition switch to ON (II) and the adaptive cruise control (ACC) switch ON.

4. Check for DTCs with the HDS.

Is DTC 113 indicated?
YES - Go to step 5.

NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections.


5. Turn the ignition switch to LOCK (0).

6. Disconnect the ACC unit 20P connector.

7. Disconnect gauge control module connector B (28P).

8. Check for continuity between ACC unit 20P connector terminal No. 10 and gauge control module connector B (28P) terminal No. 16.

Is there continuity?
YES - Go to step 9.

NO - Repair an open in the wire between the ACC unit and the branch of the F-CAN line (CANH).






9. Check for continuity between ACC unit 20P connector terminal No. 20 and gauge control module connector B (28P) terminal No. 15.

Is there continuity?
YES - Check for loose or poor connections. If OK, replace the ACC unit. Service and Repair

NO - Repair an open in the wire between the ACC unit and the branch of the F-CAN line (CANL).