Driver's Dashboard Lower Cover Removal / Installation

Driver's Dashboard Lower Cover Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to scratch the trim or the panels.

1. Adjust the steering column to the full tilt up position.

2. Remove the driver's dashboard undercover Driver's Dashboard Undercover Removal / Installation.

3. Remove the clip (A), and pull out the driver's dashboard lower cover (B) to detach the clips (C), and release the hooks (D), then remove the cover.





4. Install the cover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.