Transmission Mount: Service and Repair

5 Speed A/T 01V

Right and left transmission mounts, removing and installing





Special Tools and equipment
^ Engine/transmission support VAG1383A engine/gearbox jack
^ 3282 transmission support
^ 3282/19 adjustment plate

Removing

Note: Transmission must be supported as indicated when both transmission supports are removed. Transmission does not need to be supported this way when only one of the transmission supports is being removed.





- Prepare 3282 transmission support for Automatic Transmission 01V with 3282/10 adjustment plate and place it on the VAG1383A engine/transmission hoist.

Note: The symbols on the adjustment plate indicate the necessary mounts for Automatic Transmission 01 V and the arrow points toward front of vehicle.





- Roll VAG1383A engine/transmission hoist with 3282 transmission support under transmission and support transmission.

Note: If 3282 transmission support is not available, transmission can be supported using the VAG1383A transmission lift and the 135912 universal mount.





Right transmission support
- Remove heat shield -C-.

Note: The right heat shield is not installed on 6 cylinder TDI engines.

- Remove right heat shield -D- by removing bolts A- from transmission.





Left transmission support
- Remove heat shield -C-.

Note: The left heat shield is not installed on 4 cylinder gasoline engines.

- Remove left heat shield -D- by removing bolts -A- from transmission.





Left and right transmission supports
- Remove transmission supports -E-.
D - transmission mount (traditional)
H - hydraulic transmission mount

Note: Items -C- and -B- are not installed on vehicles with hydraulic transmission bearing -H-, because bolt-G is threaded directly into the transmission bearing.

Installing
Installation is the reverse of removal.





Tightening torques for left and right transmission supports








Tightening torques for left transmission support








Tightening torques for right transmission support