Operation CHARM: Car repair manuals for everyone.

Ignition Coil: Service and Repair






Ignition Coils

Special tools, testers and auxiliary items required

Puller For Ignition Coil (T10095 A)

Assembly tool (T10118)

Removing

- Disconnect electrical harness connectors to ignition coils, to do so attach assembly tool (T10118) on release button - arrow - and carefully disconnect harness connector.





- Attach Puller For Ignition Coil (T10095 A) on ignition coils - arrow - as depicted in the illustration and pull out ignition coils in succession.





Installing

Installation is in reverse order of removal, noting the following:

- Insert ignition coil into corresponding spark plug shaft so that the straight connector sides fit with each other - arrows -.