Rear Cigarette Lighter, with Rear A/C Display Control Head

Rear Cigarette Lighter, with Rear A/C Display Control Head

Special tools, testers and auxiliary items required

• Release tool (T40148)

Removing





- Slide the (T40148) into the cigarette lighter - item 2 - as far as the stop.

- Rotate the thumbwheel - 1 - on the (T40148) clockwise as far as the stop.

• The piston - 2 - is pulled upward and the release tabs - 1 - on the (T40148) spread - arrows -.





- Remove the cigarette lighter from the lighting ring using the (T40148).

- Disconnect the electrical connector.

Installing

Install in reverse order of removal, observing the following:


Risk of injury.

• After removing the (T40148), check to see if the lighter retaining tabs are bent.

• If the retaining tabs are bend, bend them back so the lighter does not slide out.

- Remove the support - 1 - on the (T40148).





- Slide the piston down and hold it in place.

- Rotate the thumbwheel - 4 - on the (T40148) counterclockwise - arrow -. This loosens the release tabs - 2 - on the cigarette lighter - item 3 - so the (T40148) can be removed.