Clock: Service and Repair

Radio Frequency Controlled Clock Receiver

Removing





- Remove rear bumper cover.

- Separate electrical connector - 2 - to Radio Frequency Controlled Clock Receiver (J489) - item 1 -.

- Remove bolts - arrows - and detach radio frequency controlled clock receiver.

Installing

Install in reverse order of removal, observing the following:

- Install the cover on the rear bumper.

Vehicles with Lane Change Assist

If the bumper cover was removed, the lane change assistance control module (J769)/ (J770) must be calibrated again. Refer to => [ Lane Change Assistance, Preparing for Calibration ] Lane Change Assistance, Preparing for Calibration.

Tightening Specifications