License Plate Lamp: Service and Repair

License Plate Lamp

=> [ License Plate lamp, through 08.07 ]

=> [ License Plate lamp, from 09.07 ]

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

License Plate lamp, through 08.07

Removing





- Turn light switch into "0" position.

- Remove bolt - arrow - in grip piece.

• Only the right license plate lamp is shown in illustration.

- Pry bulb carrier out of handle cover strip.

- Remove the bulb (12V, 5 W) from the terminal socket.

Installing

Install in reverse order.

License Plate lamp, from 09.07

Removing





- Turn light switch into "0" position.

- Remove screws - arrows -.

- Pry the bulb carrier - 2 - out of the rear lid.

- Remove bulb - 1 - (12V, 5 W) out of clamp-type socket.

Installing

Install in reverse order.