Brake Fluid Pressure Sensor/Switch: Service and Repair

Brake Pressure Sensor 1

Removing

• Protect engine compartment from escaping brake fluid.

- Remove power steering fluid reservoir hex bolt - 1 - and remove sideways from rubber bushing.





- Torque specification 6 Nm

- Disconnect connector - 1 -





- Remove brake pressure sensor - 4 -





Installing

Further installation is in reverse order of removal.

- Bleed brake system => [ Brake System Bleeding ] Brake System, Bleeding.

- Perform ESP road test => Vehicle Diagnosis, Testing, and Information System VAS 5051 in "Guided Fault Finding" function